Stage-Specific Pressure Programming Decouples Low-Pressure Sulfur Reduction From High-Pressure Interfacial Reconstruction in All-Solid-State Lithium-Sulfur Batteries.
Zhang Yating Y, Hou Zhongjun Z, Jiang Yuan Y, Gao Rui R et al.
The commercialization of all-solid-state Li-S batteries (ASSLSBs) remains constrained by the "impossible trinity" between high energy density, long cycle life, and low stack pressure. Here we show that stack pressure is not merely a static mechanical boundary, but a stage-specific regulator of sulfur conversion and interfacial reconstruction. Using a static pressure-resistance-overpotential (P-R-η) operational threshold algorithm, low-stack-pressure operation is predicted feasible for 50 wt% S cathodes. Further operando electrochemical measurements and multiscale chemical and structural characterizations reveal that 1 MPa discharge promotes Li2S2-rich interfacial intermediates. However, constant low-pressure cycling induces progressive pore filling that prolongs charge transport pathways, leading to inactive LiXS accumulation and triphase interfacial contact losses. State-resolved very-small-angle neutron scattering (VSANS) further uncovers a ∼5 nm structural feature that persists after low-stack-pressure discharge, which specifically diminishes upon high-pressure charging. Guided by this mechanism, we implement a pressure-programmed protocol combining 1 MPa discharge with 180 MPa charge. The resulting cell retains 98.8% of capacity after 100 cycles at 30 °C. This work establishes a dynamic pressure modulation strategy towards alleviating the "impossible trinity" by decoupling the asymmetric pressure-electrochemical behaviors.