Drug Database
AG

AG-1321001 (theobromine, SEEK / Anycough / AG1321001)

✓ Approved

Ahn-Gook Pharmaceutical · 小分子 · 小分子

什么是 AG-1321001?

AG-1321001 是一种小分子,由Ahn-Gook Pharmaceutical研发。该药已获批,用于治疗相关适应症,给药途径:Oral (PO)。

药物档案

商品名theobromine, SEEK, Anycough, AG1321001
公司Ahn-Gook Pharmaceutical
药物类别小分子
给药途径Oral (PO)
状态Approved

治疗适应症

AG-1321001 针对 2 个适应症,涉及 1 个治疗领域。

治疗领域疾病/病症分期
Respiratory, thoracic and mediastinal disordersCough✓ Approved
Respiratory, thoracic and mediastinal disordersAsthmaPhase II

相关研究文献

PubMedACS nano2026-11-17

Bandgap and Interface Engineering of Ag-Au-S Quantum Dots toward Bright Near-Infrared Emission and Deep-Tissue Bioimaging.

Akiyoshi Kazutaka K, Hayashi Hinako H, Hasegawa Mariko M, Ko Eunyeong E et al.

Low-toxicity colloidal quantum dots (QDs) with tunable near-infrared (NIR) emission are promising for bioimaging because biological tissues exhibit relatively low light scattering and absorption in the 700-1700 nm optical window. However, it remains challenging to achieve high photoluminescence quantum yields (PLQYs), aqueous stability, and tunable emission simultaneously. Here, we demonstrate efficient NIR emission from Ag-Au-S QDs by combining composition control with heterointerface engineering. Varying the Ag/Au ratio tuned the bandgap from 1.39 to 1.88 eV and shifted the PL peak from 1130 to 745 nm. QDs prepared with an Ag/(Ag+Au) precursor ratio of 0.75 had an average diameter of 2.5 nm and consisted of a polycrystalline Ag3AuS2 core surrounded by an amorphous Ag-S-rich surface layer. These QDs exhibited a PL peak at 800 nm with a PLQY of 3.4%. In-S shell coating increased the PLQY to 33.6%. Subsequent ZnS treatment produced Janus-like Ag-Au-S@In-Zn-S QDs exhibiting a PL peak at 840 nm with a PLQY of 38.9%, consistent with suppression of nonradiative recombination through surface passivation. After ligand exchange with 3-mercaptopropionic acid, the QDs were readily dispersed in water while retaining a PLQY of 27.0% and exhibited excellent PL stability in biologically relevant media. The QDs enabled in vivo deep-tissue imaging, with NIR PL detected from tissues at depths of up to 15 mm. These findings demonstrate that Ag-Au-S-based QDs are promising low-toxicity NIR probes for biomedical imaging.

PMID 43043227
阅读全文 →
PubMedMicroscopy research and technique2026-11-17

Microstructural Characteristics and Structure-Property Correlations in Nano-Ag-Modified YBa2Cu3O7 -y Superconducting Ceramics.

Demiray F F, Akkurt B B, Yildirim G G, Ulgen A T AT et al.

This study systematically investigates the influence of nano-Ag/Y partial incorporation (0.00 ≤ x ≤ 0.20) on the microstructural characteristics, electrical-superconducting transport, and mechanical response of bulk YBa2Cu3O7-y (Y-123) ceramics. Particular emphasis is placed on SEM-based microstructural characterization and comparative image analysis to examine composition-dependent morphological variations and their relationship with the measured functional properties. Temperature-dependent electrical resistivity (60-100 K), transport critical current density (Jc), scanning electron microscopy (SEM), image-based microstructural analysis, and Vickers microhardness (Hv) measurements are employed to establish correlations between microstructural characteristics and macroscopic properties. The obtained results indicate a pronounced dependence of the electrical, superconducting, and mechanical responses on the Ag incorporation level. The Ag-doped Y-123 ceramic structure prepared with x = 0.03 incorporation exhibits favorable superconducting transport characteristics, with onset and offset transition temperatures of 92.81 and 91.72 K, respectively, corresponding to a narrow transition width of 1.09 K. The transport critical current density also reaches 87 A cm-2 at this ceramic structure. SEM observations and comparative image analysis reveal a relatively homogeneous morphology with well-developed grains and fewer apparent defect- or porosity-related features, providing complementary microstructural evidence for the measured transport behavior. The recorded observations are consistent with the possibility of improved current-carrying pathways and reduced weak-link effects, although the present characterization does not directly establish specific flux-pinning mechanisms. Mechanical measurements further show that x = 0.03 Ag-containing substitution level exhibits the highest experimentally measured Vickers microhardness within the investigated series. The corresponding elastic modulus, yield strength, stiffness parameter, shear modulus, and modulus of resilience are subsequently estimated from the hardness data using semi-empirical relationships and are accordingly interpreted as hardness-derived comparative parameters rather than independently measured mechanical properties. At higher Ag incorporation levels, both the electrical-superconducting and indentation responses deteriorate, accompanied by increasingly heterogeneous surface morphology in the SEM observations. All in all, the results indicate that the Ag addition level of x = 0.03 provides the most favorable combination of measured superconducting transport, microstructural characteristics, and indentation hardness among the investigated ceramic structures. The findings indicate that SEM and comparative image analysis provide useful complementary approaches for relating microstructural variations to the functional behavior of Ag-modified Y-123 ceramics.

PMID 43041019
阅读全文 →
PubMedBMC pulmonary medicine2026-11-17

Efficacy and safety of inhaled versus injectable aminoglycosides in Mycobacterium avium complex pulmonary disease: a network meta-analysis.

Shen Yafan Y, Kuang Liqi L, Wang Niankang N, Pu Qi Q et al.

The prevalence of Mycobacterium avium complex (MAC) pulmonary disease shows a sustained upward trend, with treatment challenged by intrinsic drug resistance and toxicity of conventional therapies. Aminoglycosides (AG) are key agents for MAC management, but injectable AGs exhibit poor pulmonary targeting and severe systemic toxicity, particularly ototoxicity. Inhaled AG formulations enhance local lung delivery and reduce systemic exposure. This network meta-analysis (NMA) compared efficacy and safety of inhaled versus injectable AG regimens for microbiologically verified MAC pulmonary disease. PubMed, CNKI, and Wanfang databases were searched from inception to January 2026 for randomized controlled trials (RCTs) and cohort studies. The primary endpoint was 6-month sustained sputum culture conversion; secondary endpoints included ototoxicity, nephrotoxicity, and respiratory adverse events. Bias risk and evidence quality were assessed via RoB 2.0/ROBINS-I and GRADE, respectively. A frequentist fixed-effect network meta-analysis (NMA) was conducted (PROSPERO: CRD420251159363). Four studies (three RCTs and one cohort study, total n = 517) were included, with no statistical heterogeneity (I² = 0%). Inhaled aminoglycosides significantly improved 6-month sustained sputum culture conversion compared with standard therapy (OR = 4.27, 95% CI: 2.38-7.66; moderate-quality evidence per GRADE). Injectable aminoglycosides showed no significant benefit (OR = 1.88, 95% CI: 0.37-9.54; very low-quality evidence). No ototoxicity or nephrotoxicity was observed with inhaled aminoglycosides in the three RCTs (0/302), whereas the injectable aminoglycoside group (single cohort, n = 19) reported a 78.9% ototoxicity rate. Inhaled regimens ranked highest by P-score (0.912). This review is limited by a small total study count (n = 4), reliance on a single observational cohort for injectable regimens, lack of direct head-to-head trials, and imprecision in indirect comparisons. Inhaled aminoglycoside regimens appear to yield greater efficacy and a more favorable safety profile than standard therapy, particularly in patients with nodular/bronchiectatic phenotype. Injectable regimens may be considered as salvage therapy for severe fibrocavitary cases due to limited high-quality evidence and substantial toxicity. Further head-to-head RCTs are warranted.

PMID 43040274
阅读全文 →
PubMedLangmuir : the ACS journal of surfaces and colloids2026-11-17

Quaternary Ammonium Surfactant Alkyl Chain Length-Directed Evolution of AuCu-Cu Janus Nanoparticles into AuCuAg Heterostructures for Plasmonic Catalysis.

Zhang Xiaolin X, Yi Zhaoqi Z, Ma Yanyun Y, Min Yuanyuan Y et al.

Engineering the composition and structure of multimetallic nanostructures provides a versatile means to tailor their plasmonic and catalytic properties. Herein, a seeded-growth approach combined with surfactant-directed galvanic replacement is used to prepare AuCu-Cu and AuCuAg nanostructures with well-defined compositions and architectures. Spherical Au seeds were first grown into trisoctahedral Au nanoparticles and then transformed into AuCu-Cu Janus nanoparticles (JNPs). Galvanic replacement with Ag in the presence of CTAC or OTAC yielded AuCuAg nanoparticles (NPs) or AuCuAg hybrid nanoparticles (HNPs), showing that the alkyl chain length of the quaternary ammonium surfactant directs the structural evolution during Ag incorporation. Using NaBH4-mediated reduction of 4-nitrophenol as a model reaction, all catalysts exhibited enhanced rate constants under light irradiation. AuCuAg HNPs give the highest absolute light-driven rate (0.145 min-1), while AuCuAg NPs give the largest light/dark enhancement factor (about 8.2). Finite element method simulations show that the dominant absorption shifts from ∼735 to ∼640 and ∼855 nm for the three structures, with the electric field localized at heterointerfaces and geometric boundaries. This work clarifies how surfactant chain length governs the structural evolution of multimetallic heterostructures and provides a mechanistic framework for interpreting plasmonic enhancement in such systems.

PMID 43043039
阅读全文 →
PubMedACS nano2026-11-17

Dual DNA Nanomaterial-Regulated Homogeneous Immunoreaction-Enabled One-Step Electrochemical Analysis of Multiple Biomarkers in Clinical Samples.

Jiang Pengjun P, Wang Yue Y, Xiong Ying Y, Zhang Le L et al.

Homogeneous immunoassays offer a streamlined alternative to traditional heterogeneous methods by eliminating separation and washing steps. However, they are often hampered by low sensitivity, matrix interference, and limited multiplexing capability. Herein, we reported a dual DNA nanomaterial-based homogeneous electrochemical immunoassay that achieved ultrasensitive, one-step, simultaneous detection of multiple biomarkers. The system comprised a cyclic DNA nanomaterial (C-DNM) and a Y-shaped DNA nanosphere (Y-DNM) that coordinated Ag+ and Hg2+ via base mismatching, and antibodies were conjugated by the biotin-streptavidin system. Specific antigen-antibody binding could exert spatial steric hindrance on C-DNM, thereby triggering cascade metal ions release from Y-DNM and producing a second burst of signal amplification. This mechanism enabled detection limits down to the ag/mL level. Utilizing this strategy, we successfully quantified urinary ESAT-6 and LAM for tuberculosis, as well as PD-L1/MUC1-positive small extracellular vesicles (SEVs) and circulating tumor cells for lung cancer. The whole detection could be completed within 30 min. Clinical validation was taken in 60 samples, and the receiver operating curve analysis demonstrated good diagnostic accuracy, which showed strong correlation with clinical imaging findings. This dual DNA nanomaterial strategy provided a universal, rapid, and ultrasensitive tool for homogeneous immunoassay-based precision diagnostics of diseases.

PMID 43043207
阅读全文 →
PubMedChemical science2026-11-17

Interfacial tailoring with WO3 for CO2 reduction selectivity shift of Cu nanocubes.

Liu Jiahao J, Kobayashi Hirokazu H, Kimura Yojiro Y, Donoshita Masaki M et al.

Designing an oxide-metal interface potentially offers a way for tailoring CO2 reduction reaction (CO2RR) performance including selectivity and activity. Here, we present a novel CO2RR catalyst in which WO3 is deposited onto well-defined Cu nanocubes (NCs), referred to as WO3/Cu NCs. Introducing WO3 induces interfacial electron transfer from Cu to WO3, thereby modulating the electronic structure of the Cu surface. The resulting oxide-metal interface markedly alters the product distribution, shifting the dominant product from C2H4 to CO. In situ Raman spectroscopy and density functional theory calculations revealed that modulation of the *CO adsorption configuration and weakening of the *CO adsorption energy contribute to tuning the reaction pathway and shifting the product selectivity. Notably, WO3/Cu NCs also exhibited a higher partial current density for CO than Ag nanoparticles, a benchmark CO-producing catalyst, which is attributed to the enhanced CO2 affinity at the WO3/Cu NCs interface. Moreover, WO3 stabilized both the size and cubic morphology of Cu NCs, whereas bare Cu degraded into aggregated nanograins. These results provide a useful strategy for modulating reaction pathways via oxide/Cu interfacial engineering, with potential applicability to diverse element combinations and electrocatalytic systems.

PMID 43041839
阅读全文 →

注册免费账户还可查看另外 9996 篇文献

免费注册查看全部文献 →

了解更多AG-1321001